Inicio
switch usb
USB Cable with Switch : ID 1620 : $2.95 : Adafruit Industries, Unique & fun DIY electronics and kits

USB Cable with Switch : ID 1620 : $2.95 : Adafruit Industries, Unique & fun DIY electronics and kits

4.6 (775) · € 2.00 · En stock

Adafruit Industries, Unique & fun DIY electronics and kits USB Cable with Switch : ID 1620 - Add a power switch to any USB-powered project simply by plugging this between the USB power port and the USB cable. This is the most useful thing you never knew you needed! You'll want to pick up a bunch for your electronic projects.Comes with a USB A socket on one
Add a power switch to any USB-powered project simply by plugging this between the USB power port and the USB cable. This is the most useful thing you never knew you needed! You'll want to pick up a bunch for your electronic projects.Comes with a USB A socket on one end and a USB A plug on the other. In between is an in-line switch that is rated for 2 Amps. The data lines are not connected through - this is a ground/5V power switch only! The switch is on the positive 5V line. A great match for our USB wall adapters or battery packs. If you have a device that uses the data lines to set the charge rate, this switch may not work, we use it for adding a 'hard power switch' to a Raspberry Pi.

USB Type C Cable with Data/Charge Switch [1 meter long] : ID 4696 : $4.95 : Adafruit Industries, Unique & fun DIY electronics and kits

Adafruit USB Cable with Switch [ADA1620] : Electronics

USB cable - 6 A/MiniB : ID 899 : $2.95 : Adafruit Industries, Unique & fun DIY electronics and kits

Cables, USB Cables Products Category on Adafruit Industries

If you love DIY cable-rigging, then these USB adapters are right up your alley! Making custom USB cables has never been easier. Just grab one of our

DIY USB Cable Parts - Straight Type A Jack

USB Host Switching Cable - Mini Mechanical KVM ADA4844

Adafruit USB Cable with Switch [ADA1620] : Electronics

USB Cable with Switch : ID 1620 : $2.95 : Adafruit Industries, Unique & fun DIY electronics and kits

Key Features: Add a power switch to any USB-powered project Great match for our USB wall adapters or battery packs USB A socket on one end and a USB A plug on the other This is a ground/5V power switch only Add a power switch to any USB-powered project simply by plugging this between the USB power port and the USB cable. This is the most useful thing you never knew you needed! You'll want to pick up a bunch for your electronic projects.

Adafruit USB Cable with Switch ADA1620

The cable is easiest way ever to connect to your microcontroller/Raspberry Pi/WiFi router serial console port. Inside the big USB plug is a USB<->Serial conversion chip and at the end of the 36 cable are four wire - red power, black ground, white RX into USB port, and green TX out of the USB port. The power pin provides the 5V @ 500mA direct from the USB port and the RX/TX pins are 3.3V level for interfacing with the most common 3.3V logic level chipsets.