Inicio
carpet cleaner machine
Mytee® 120 PSI Heated Carpet Cleaning Extractor w/ 12 Wand & 15' Hose (#2002CS) —

Mytee® 120 PSI Heated Carpet Cleaning Extractor w/ 12 Wand & 15' Hose (#2002CS) —

4.7 (368) · € 1003.99 · En stock

The Mytee® 2002CS carpet cleaning extractor helps you get a lot accomplished with a minimum amount of effort exerted. Save time & make money! That's the motto of this powerful little carpet extractor. Comes with a 15 foot crush-proof hose & 12 inch wand.
This Mytee 2002CS carpet cleaning box extractor was designed for the busy professional handling many carpet and upholstery cleaning jobs. It's tough, it's durable, and it's especially powerful! With a single 3-stage motor, it achieves a powerful 130 water lift, leaving your carpets clean and dry. A 120 PSI pump powers dirt out of your carpet fibers, fabrics, and upholstery (add one of our air blowers for quicker drying times). The 10 gallon solution tank is ample capacity to tackle a moderate-sized carpet cleaning job or a very large piece of furniture. You'll get a lot done with this carpet extractor, with a minimum amount of effort exerted.

The 2002CS extractor comes with a 12 dual-jet drag wand that hooks up to a 1.5 vacuum hose. It also comes with a #H141V connector that screws on to any normal 1.5 vacuum hose to hook it up to the 2 patented Cuff-Lynx™ connector that comes on the machine.

To make sure you're 100% ready to start cleaning when you receive this machine, we recommend taking a look through our carpet cleaning chemicals, power brushes, and upholstery tools to make sure you have everything you'll need.

If you're looking for a little smaller Mytee machine for small jobs and spot removal, please take a look at the S-300 carpet spotter. For other options, please take a look at our full lines of box extractors and portable spotters.

Features

1,200-watt in-line heater with a max temp of 210˚ for maximum cleaning efficiency.
Waist-high positioned switches, easy open lid, and bucket-high drain make for user-friendly operation.
Includes a 12 dual jet drag wand with handle grip & a 15' crush-proof vacuum hose with high-pressure solution hose.
Roto-molded polyethylene body guarantees long life and operation in any atmosphere.
Non-marking rear wheels and 3-inch non-marking front casters.
Powerful single 3-stage vacuum motor for maximum water recovery.

Caring for Your Carpet Extractor

Your carpet extractor should be winterized between uses if it is to be exposed to freezing temperatures. To winterize your machine, pour 1/2 gallon of windshield wiper fluid into the empty solution tank. Run the pump until fluid flows through the tank. Then run 1 gallon of water through the extractor before the next use.