FEATURES: High Power 220 N·m Genuine solution for high demand industrial users Having excellent ability to perform heavy-duty continuous tightening; Able to continuously tighten heavy duty screws such as metal fastening screws or lag screws Delivers up to 50% higher work speed than DTD171 Multiple operation modes for a

FEATURES:

• High Power 220 N·m
• Genuine solution for high demand industrial users
• Having excellent ability to perform heavy-duty continuous tightening; Able to continuously tighten heavy duty screws such as metal fastening screws or lag screws
• Delivers up to 50% higher work speed than DTD171
• Multiple operation modes for a wide range of applications; 4-speed power selection plus 6 Assist modes (2 T-modes, 1 Wood mode, 3 Bolt modes)
• Improved bolt modes for more convenience in tightening machine screws
• Constant speed control maintains fastening torque by preventing the rotation speed reduction caused by decreased battery capacity
• New one-touch bit installation; In order to prevent the bit from unexpectedly falling off, more effective mechanism has been realized by increasing the spring load of the sleeve holding spring and by adding a coil spring not to increase resistance against insertion of the bit
• One-touch speed selector provides precise fastening control for a wide range of applications
• Enhanced anvil holder rigidity; Material change from Needle bearing to Ball bearing provides reduction of bit wobbling
• Variable speed control by trigger for precise fastening in a wide variety of applications
• Built-in LED light illuminates the work area
• Phosphorescent bumper glows in dark places
• Ergonomically designed handle with rubberized soft grip for increased comfort
• Reversing switch is conveniently located
• Electric brake for maximum productivity
• Durable, reversible belt clip convenient for temporary tool hanging
• eXtreme Protection Technology (XPT) is engineered for improved dust and water resistance for operation in harsh conditions
• Battery protection circuit protects against overloading, over-discharging and over-heating

SPECIFICATIONS:

Li-Ion

Ah

4.0

2.5

 

Capacity	Machine Screw: M4 – M8 (5/32″ – 5/16″)
	Standard Bolt: M5 – M16 (3/16″ – 5/8″)
	High Strength Bolt: M5 – M14 (3/16″ – 9/16″)
	Coarse thread (in length): 22 – 125 mm (7/8″ – 4-7/8″)
Hex Shank	6.35 mm (1/4″)
No Load Speed (RPM)	Max / Hard / Mid / Soft / Wood / Bolt (1) / Bolt (2) / Bolt (3) / T (1) / T (2) mode: 0 – 3,700 / 3,200 / 2,100 / 1,100 / 1,800 / 2,500 / 3,700 / 3,700 / 2,400 / 3,700
Impacts Per Minute (IPM)	Max / Hard / Mid / Soft / Wood / Bolt (1) / Bolt (2) / Bolt (3) / T (1) / T (2) mode: 0 – 4,400 / 3,600 / 2,600 / 1,100 / 4,400 / N/A / 4,400 / 4,400 / N/A / 2,600
Max Fastening Torque	220 N·m (1,950 in.lbs.)
Fastening Torque	Hard / Mid / Soft: 170 / 50 / 20 N·m (1,510 / 440 / 180 in.lbs.)
Max Output	600 W
Vibration Level	Impact tightening of fasteners of the maximum capacity of the tool: 10.0 m/s²
Vibration K Factor	Impact tightening of fasteners of the maximum capacity of the tool: 1.5 m/s²
Sound Pressure Level	96 dB(A)
Sound Power Level	107 dB(A)
Noise K Factor	3 dB(A)
Dimensions (L x W x H)	w/ BL4025: 120x86x245 mm (4-3/4″x3-3/8″x9-5/8″)
	w/ BL4040: 120x86x250 mm (4-3/4″x3-3/8″x9-7/8″)
Net weight	1.7 – 2.0 kg (3.7 – 4.4 lbs.)

FEATURES: High Power 220 N·m Genuine solution for high demand industrial users Having excellent ability to perform heavy-duty continuous tightening; Able to continuously tighten heavy duty screws such as metal fastening screws or lag screws Delivers up to 50% higher work speed than DTD171 Multiple operation modes for a wide range of applications; 4-speed power selection plus 6 Assist modes (2 T-modes, 1 Wood mode, 3 Bolt modes) Improved bolt modes for more convenience in tightening machine screws Constant speed control maintains fastening torque by preventing the rotation speed reduction caused by decreased battery capacity New one-touch bit installation; In order to prevent the bit from unexpectedly falling off, more effective mechanism has been realized by increasing the spring load of the sleeve holding spring and by adding a coil spring not to increase resistance against insertion of the bit One-touch speed selector provides precise fastening control for a wide range of applications Enhanced anvil holder rigidity; Material change from Needle bearing to Ball bearing provides reduction of bit wobbling Variable speed control by trigger for precise fastening in a wide variety of applications Built-in LED light illuminates the work area Phosphorescent bumper glows in dark places Ergonomically designed handle with rubberized soft grip for increased comfort Reversing switch is conveniently located Electric brake for maximum productivity Durable, reversible belt clip convenient for temporary tool hanging eXtreme Protection Technology (XPT) is engineered for improved dust and water resistance for operation in harsh conditions Battery protection circuit protects against overloading, over-discharging and over-heating SPECIFICATIONS: Li-Ion Ah 4.0 2.5   Capacity Machine Screw: M4 – M8 (5/32″ – 5/16″) Standard Bolt: M5 – M16 (3/16″ – 5/8″) High Strength Bolt: M5 – M14 (3/16″ – 9/16″) Coarse thread (in length): 22 – 125 mm (7/8″ – 4-7/8″) Hex Shank 6.35 mm (1/4″) No Load Speed (RPM) Max / Hard / Mid / Soft / Wood / Bolt (1) / Bolt (2) / Bolt (3) / T (1) / T (2) mode: 0 – 3,700 / 3,200 / 2,100 / 1,100 / 1,800 / 2,500 / 3,700 / 3,700 / 2,400 / 3,700 Impacts Per Minute (IPM) Max / Hard / Mid / Soft / Wood / Bolt (1) / Bolt (2) / Bolt (3) / T (1) / T (2) mode: 0 – 4,400 / 3,600 / 2,600 / 1,100 / 4,400 / N/A / 4,400 / 4,400 / N/A / 2,600 Max Fastening Torque 220 N·m (1,950 in.lbs.) Fastening Torque Hard / Mid / Soft: 170 / 50 / 20 N·m (1,510 / 440 / 180 in.lbs.) Max Output 600 W Vibration Level Impact tightening of fasteners of the maximum capacity of the tool: 10.0 m/s² Vibration K Factor Impact tightening of fasteners of the maximum capacity of the tool: 1.5 m/s² Sound Pressure Level 96 dB(A) Sound Power Level 107 dB(A) Noise K Factor 3 dB(A) Dimensions (L x W x H) w/ BL4025: 120x86x245 mm (4-3/4″x3-3/8″x9-5/8″) w/ BL4040: 120x86x250 mm (4-3/4″x3-3/8″x9-7/8″) Net weight 1.7 – 2.0 kg (3.7 – 4.4 lbs.)

Model: TD001GD201, Makita TD001GD201 is a powerful Impact Driver from the brand new 40Vmax XGT Range. This new standalone cordless system from Makita

Makita TD001GD201: Cordless Impact Driver, 40V, Hex. Shank 1/4, 0-3700rpm, 220Nm, 1.7kg

Аккумуляторная дрель-шуруповерт Makita XGT BL 40В DF001GD201 - выгодная цена, отзывы, характеристики, фото - купить в Москве и РФ

The Makita XGT® brushless cordless impact wrench kit with a 3/4 Inch square drive is designed to use for automotive, installation and fabrication

Makita XGT 40V max Impact Wrench Kit 4 Speed 3/4in

40V max XGT® Brushless Cordless 4‑Speed Impact Driver Kit (2.5Ah)

Makita TD090DWE Cordless Impact Driver – vertexpowertools

Cordless Impact Driver, Li-Ion, 12.0V - 通販

Products Makita 牧田(香港)有限公司- Cordless Impact Driver TD001GD205 / TD001GD206 / TD001GD207 / TD001GD208 / TD001GD203 / TD001GD204 / TD001GZ / TD001GZ01

Model: TD001GD201, Makita TD001GD201 is a powerful Impact Driver from the brand new 40Vmax XGT Range. This new standalone cordless system from Makita

Makita TD001GD201: Cordless Impact Driver, 40V, Hex. Shank 1/4, 0-3700rpm, 220Nm, 1.7kg

Makita Cordless Tools – Page 4 – vertexpowertools

Makita TW001GD201 Impact wrench 3/4 1800Nm 40 Volt Max 2.5Ah Li-Ion in MakPac

TD001GD201/ GZ Cordless - Product Detail

MAKITA XGT CHRISTMAS COMBO 3 CORDLESS 40Vmax DF001GD201 DRIVER DRILL 13MM (1/2) + TD003GZ IMPACT DRIVER [ VALID UNTIL 31 JANUARY 2024 ]

Makita GDT01Z 40V Max XGT Brushless Cordless 4 Speed Impact Driver, Tool Only

Makita TW001GM201 19 mm (3/4″) 40Vmax Cordless Impact Wrench – GLOBALL HARDWARE & MACHINERY SDN BHD

FEATURES:, High Power 220 N·m, Genuine solution for high demand industrial users, Having excellent ability to perform heavy-duty continuous

Makita TD001GZ 40V Cordless Brushless Impact Driver (XGT Series) [Bare Tool]