travelsjini.com

Shelly 2.5 restarts itself · Issue #10237 · arendst/Tasmota · GitHub

4.9 (479) · € 23.00 · En stock

PROBLEM DESCRIPTION A clear and concise description of what the problem is. I get occasional restarts on the device with RestartReason = Hardware Watchdog. I use the device as a shutter controller so sometimes when I try to open the shut

Issue with Shelly 2.5 (on latest Tasmota firmware) with button switch & control light · arendst Tasmota · Discussion #14476 · GitHub

Tasmota on Shelly Plug Plus S cannot be reset (and is not reachable) · arendst Tasmota · Discussion #19969 · GitHub

Shelly 2.5 gets significantly hotter since 8.2.0.1 · Issue #7991 · arendst/ Tasmota · GitHub

Shelly 2.5 restarts itself · Issue #10237 · arendst/Tasmota · GitHub

No Power Measurements on Shelly 2.5 with only 1 connected load · Issue #9692 · arendst/Tasmota · GitHub

When powering on 1 relay on Shelly 2.5, the other relay also turns on when shutter support is enabled · Issue #16235 · arendst/Tasmota · GitHub

Shelly 2.5 is randomly restarts with reason Hardware Watchdog and looses shutter position · arendst Tasmota · Discussion #20738 · GitHub

Flash of Shelly plus 2PM works, but after waiting some minutes, the ESP32 has the state after flashing (reverting all configuration steps) · Issue #19757 · arendst/Tasmota · GitHub

Historical power data incorrect on Shelly 2.5 device · Issue #5968 · arendst /Tasmota · GitHub

Device disconnecting from mqtt every 60 seconds, even after reflashing. · Issue #6816 · arendst/Tasmota · GitHub

shelly 2.5 exception 9 when enabling i2c · Issue #8027 · arendst/Tasmota · GitHub