4.6 (619) · € 19.50 · En stock
Hi, I’ve created a yaml config file for the following config: Venitlation unit (in my case a Storkair WHR 930), controlled via a Perilex Plug Old-fashioned 3-level switch to control the ventilation unit Shelly 2.5 to controll/influence the 3-level switch These ventilation units are controlled relatively simple: -when L1 is live/hot, the ventilation unit goes to medium -when L2 is live/hot, the ventilation unit goed to high -when L1 and L2 are not live, the ventilation unit goes to low -i
Shelly 2.5 as pulse relay to switch existing dimmer - Configuration - Home Assistant Community
Shelly EM Power (kWh) always zero, but wattage (kW) reading fine - why? - Configuration - Home Assistant Community
Ventilation: Shelly 2.5 with 3-level switch - ESPHome - Home Assistant Community
Home Assistant and ESPHome automatically ventilate my home when CO2 levels are high : r/homeassistant
Zehnder ComfoAir CA350 integration via serial connection (RS232) and MQTT - #241 by adorobis - Share your Projects! - Home Assistant Community
ESP Conrol Brinks WTW - Let's Control It
Which smart switch is needed? - #24 by stevemann - Hardware - Home Assistant Community
Automating a physical preset dimmer switch with a Shelly 2.5 : r/Esphome
ESPHome - Home Assistant Community
Shelly 2.5: Flash ESPHome Over The Air!